5 min read
How to Apply End Banding to Veneer Wood Ceilings
While it is similar to edge banding, end banding (or endbanding) is applied to the end grain rather than on the long horizontal edge of a veneer panel or wood ceiling product.
4 min read
Field Cutting Deep Member Wood Grille Ceilings
When it comes to fielding cutting deep member grilles that have a larger depth, say 1x4 or 2x6, you are going to have to use different tools at your job site in order to process them.
7 min read
Field Cutting Acoustic Planks and Acoustic Tiles
Acoustic planks and acoustic tiles can be tricky to cut in the field because of the vulnerable “teeth” that make up acoustic wood products. By using the right tools and techniques, field cutting can be accomplished successfully. (“Teeth” are the results of grooves cut into a wood panel which in turn intersect a hole drilled in the back of the panel. This combination groove …