The 9Wood T & G Splay Linear style wood ceiling offers a design where the individual wood members abut with a splay groove accenting the edge-to-edge joint. Members are installed randomly to create a continuous look. Standard panel lengths are 4', 6', 8', or 10' (nominal) for solid wood.
The T&G Splay Linear provides the traditional splay groove profile in a closed reveal, creating a continuous, monolithic ceiling field. Access can be achieved through strategically located access panels or from room perimeters. Members are clipped to T-Bar main runners progressively.
Show Specification and Performance Info
Acclimatization
T & G Splay Linears must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.
Acoustics
The T & G Splay Linear is considered acoustically reflective.
Fire Rating
Individual members and components can be treated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.
LEED
T & G Splay Linears may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.
MEP
The T & G Splay Linear permits MEP penetrations in the ceiling's surface. Cut panels may require supplemental reinforcement. Fixtures and diff users must be independently supported.
Seismic
Clips are typically mechanically screwed to T-Bar for seismic compliance. Please consult local code or a licensed engineer for any additional requirements.
Species & Finishes
9Wood can offer both domestic and imported species for the T & G Splay Linear. Clear, satin sheen finish is standard; custom stain matches are available. For additional information see our species article.
Suspension
T & G Splay Linears are attached to 15/16" heavy duty T-Bar main runners via clips and screws. Main runners are typically 2' on center.
System Weight
T & G Splay Linears typically weigh 2-4 pounds per square foot, depending on members per linear foot and species.
9Wood Spec Book
Get it Here:
Download our beautiful spec book, or snap the QR code and get it on your phone.
Learn More...
Revit Models
Beta Test:
9Wood is bringing its model library up to date, and we're looking for testers. If you'd like to participate, click below.
Learn More...
Kick-Off WebCom
Get Ready:
9Wood has brought the traditional on-site meeting into the 21st Century. See how we'll help manage your schedule.
Learn More...
2500 T & G Splay Linear (click links to download CAD details)
Member Depth
(Softwood) |
Member Depth
(Hardwood or Veneer) |
O.C. Spacing |
Members per Linear Foot |
| 2 |
3 |
4 |
5 |
6 |
| 5/8" |
3/4" |
3" |
|
2514-4 |
|
|
|
| 5/8" |
3/4" |
5" |
2516-2 |
|
|
|
|
NOTE: If the CAD details for your preferred product are not available, please let us know and we will get them to you as soon as possible.
- Products
- Services
- Our Work
- Support
- About Us
- Contact Us
© 2018 9Wood | All rights reserved. | FSC® License Code FSC-C012655.
