4 min read
Crating Wood Ceilings the 9Wood Way
A typical wood ceiling order requires anywhere from 2-10 crates. Crates are typically 2-3ft wide, 8-10ft long and weight 500-3000lbs.
4 min read
A typical wood ceiling order requires anywhere from 2-10 crates. Crates are typically 2-3ft wide, 8-10ft long and weight 500-3000lbs.
5 min read
Have you ever wondered how a simple hair dryer can help you while installing wood ceilings at a jobsite? Exterior wood ceilings need protection. The best way to provide that protection is to ensure all wood surfaces are properly sealed from the elements. Without the proper field treatment, exterior wood ceilings can quickly succumb to …
5 min read
While it is similar to edge banding, end banding (or endbanding) is applied to the end grain rather than on the long horizontal edge of a veneer panel or wood ceiling product.
4 min read
When it comes to fielding cutting deep member grilles that have a larger depth, say 1x4 or 2x6, you are going to have to use different tools at your job site in order to process them.
4 min read
Veneer delamination is a separation of the surface layer from the core material caused by a failure of the bonding adhesive between the two layers.
4 min read
Surface damage often takes the form of scratches, dings, splits, holes, or gouges. This video walks through the basic steps of repair.
4 min read
Minor edge damage and chip-out are the most common type of damage we see out in the field. It disrupts the edge of a wood member and will draw the eye to the area.
4 min read
Scratches and scuffs on wood ceilings are anything in the finish that disrupts the sheen and draw the eye to the defect. This video walks through the basic steps of repair.
11 min read
Not stopping to fix small, cosmetic defects during wood ceiling installations can result in expensive repairs after the Punch List comes out.
4 min read
The beauty of wood is widely known with the unique character that gives it an unmatched look. The 9Wood Finishing Process is how we keep it protected.