Product Data

While it is similar to edge banding, end banding (or endbanding) is applied to the end grain rather than on the long horizontal edge of a veneer panel or wood ceiling product.

When it comes to fielding cutting deep member grilles that have a larger depth, say 1x4 or 2x6, you are going to have to use different tools at your job site in order to process them.

Wood Grille Ceilings are very adaptive with other kinds of mechanical penetrations like sprinklers, speakers, or other circular cut-outs.

Grilles can be adapted to work with a lot of different mechanical penetration. This video we’ll be processing in-panel linear cut outs for 1100 series Cross Piece Grilles.

In this video, we process curved or circular end cuts in 1100 Series Cross Piece Grilles. This applies across most wood grille ceiling types.

This video shows how to do angle cuts for a Wood Grille Ceiling. Square cut ends and angle cuts are very similar.

Square Cut Grilles Today, we’re going to be processing square cut ends for 1100 series Cross Piece Grilles. For the purposes of our demonstration, we’re using a 1” x 2” member grille, but the concept is very similar when you move across different products with different member profiles. What tools do I need? Regarding the …