4 min read
Repairing Surface Damage
Surface damage often takes the form of scratches, dings, splits, holes, or gouges. This video walks through the basic steps of repair.
4 min read
Repairing Chip-Out & Edge Damage
Minor edge damage and chip-out are the most common type of damage we see out in the field. It disrupts the edge of a wood member and will draw the eye to the area.
4 min read
Repairing Minor Scratches and Scuffs
Scratches and scuffs on wood ceilings are anything in the finish that disrupts the sheen and draw the eye to the defect. This video walks through the basic steps of repair.
5 min read
What is the Difference Between Hardwood and Softwood?
Hardwood vs Softwood. Both are going to bring warmth and beauty to your space, but sometimes the terms are tossed around and it’s not clear.
4 min read
The 9Wood Finishing Process
The beauty of wood is widely known with the unique character that gives it an unmatched look. The 9Wood Finishing Process is how we keep it protected.
4 min read
A Story of Values with 9Wood’s Production Manager
Dave Gibson, 9Wood's Production Manager, shares on-time performance and the company values that drive our production process.
4 min read
How to do Circular Cut-Outs for Grilles
Wood Grille Ceilings are very adaptive with other kinds of mechanical penetrations like sprinklers, speakers, or other circular cut-outs.
4 min read
How to do Square Cut-Outs for Wood Grilles – 9Wood Field Guides
Grilles can be adapted to work with a lot of different mechanical penetration. This video we’ll be processing in-panel linear cut outs for 1100 series Cross Piece Grilles.
4 min read
How to Cut Curves in Wood Grille Ceilings – 9Wood Field Guides
In this video, we process curved or circular end cuts in 1100 Series Cross Piece Grilles. This applies across most wood grille ceiling types.
4 min read
How to Angle Cut Wood Grille Ceilings – 9Wood Field Guides
This video shows how to do angle cuts for a Wood Grille Ceiling. Square cut ends and angle cuts are very similar.