The 9Wood Lay-in Linear style wood ceiling offers a design where the individual wood member is wider than it is deep. The standard panel width is 24". Standard panel lengths are 4', 6', 8', or 10' (nominal) for solid wood. Veneers with matching edge banding are frequently used in 8' lengths. Cost budgets are typically the decision driver. Both perform well. In non-seismic zones this suspension system allows for productive installation and easy lift-out accessibility.

The Lay-in Linear uses a pre-assembled panel fabrication process. Full panel access is available by means of lay-in backers that permit lift-out accessibility: lift, shift, and remove. In seismic zones it requires a safety wire tie-off or lock-down screws.

Show Specification and Performance Info

Featured Project

Wood Ceilings in 9 Minutes

Heads Up:

Ensure a successful design outcome: Learn about how to design and specify a better wood ceiling. 9Wood has some heads-up advice.

Learn More...

9Wood Spec Book

Get it Here:

Download our beautiful spec book, or snap the QR code and get it on your phone.

Learn More...


Find It:

Need help finding what you're looking for? Use our search page!

Learn More...

2200 Lay-In Linear (click links to download CAD details)

Member Depth
Member Depth
(Hardwood or Veneer)
Member Width Members per Linear Foot
2 3 4 5 6
5/8" 3/4" 1 3/8" 2212-2 2212-3 2212-4 2212-5 2212-6
5/8" 3/4" 2 1/4" 2213-2 2213-3 2213-4    
5/8" 3/4" 3 1/4" 2214-2 2214-3      
5/8" 3/4" 5 1/4" 2216-2        

NOTE: If the CAD details for your preferred product are not available, please let us know and we will get them to you as soon as possible.

  • 2100
  • 2200
  • 2300
  • 2400
  • 2500
  • 2600
  • 2700

© 2018 9Wood | All rights reserved. | FSC® License Code FSC-C012655.