9Wood

Home Your wood ceiling experts. Design to delivery.

1300 Lay-In Grille

About andrewcox

1300 Lay-In Grille

Great looking, fully accessible from below, a natural choice when style and function are required.

The 9Wood Lay-in Grille style wood ceiling offers a design where the individual wood member is deeper than it is wide. The standard panel width is 24″. Standard panel lengths are 4′, 6′, 8′, or 10′ (nominal). In non-seismic zones this suspension system allows for productive installation and easy accessibility.

The Lay-in Grille uses a pre-assembled panel fabrication process. This product typically installs in non-seismic areas. In seismic zones it requires a safety-wire tie-off or lock-down screws. Panel access is by means of lift, shift, and remove.

Download Documents

DATA SHEET

Download Now

GUIDE SPEC

Download Now

CAD DETAILS

View All

ACOUSTIC TESTS

View All

SPECIFICATIONS
& PERFORMANCE

BELOW

SPECIES &
FINISHES

VIEW

REQUEST
SAMPLES

SUBMIT

FULL
LIBRARY

VISIT

Acclimatization

Lay-In Grilles must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.

Acoustics

The Lay-In Grille can enhance acoustics via sound absorbing material placed over open reveals within the T-Bar grid. Insulation is typically provided locally.

Fire Rating

Individual members and components can be treated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.

LEED

Lay-In Grilles may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.

MEP

The Lay-In Grille permits MEP penetrations in the ceiling’s surface. Cut panels may require supplemental reinforcement. Fixtures and diff users must be independently supported.

Seismic

Lay-In Style Wood Grille panels lay into standard T-Grid. They may require safety wire tie-off or screw lock to T-Bar. Please consult local code or a licensed engineer for any additional requirements.

Species & Finishes

9Wood offers both domestic and imported species for the Lay-In Grille. Clear, matte sheen finish is standard; custom stain matches are available. For additional information see our species article.

Suspension

Lay-In Grilles lift and shift into 15/16″ heavy duty T-Bar main runners. Main runners are typically 2′ on center.

System Weight

Lay-In Grilles typically weigh 2-4 pounds per square foot, depending on members per linear foot and species.

Projects Featuring this System

Phil and Penny Knight Campus for Accelerating Scientific Impact

Eugene, OR

Phil and Penny Knight Campus for Accelerating Scientific Impact

Eugene, OR

Simon Fraser University Shrum Science Centre Chemistry

Burnaby, BC

Simon Fraser University Shrum Science Centre Chemistry

Burnaby, BC

Ninkasi Admin Building

Eugene, OR

Ninkasi Admin Building

Eugene, OR