2600 Flush Joint Linear
A wide plank and narrow V-groove joints create a uniform surface to control color and grain.
The 9Wood Flush Joint Linear style wood ceiling offers a design where the individual wood members abut with a flush-joint edge-to-edge profile. Members are installed randomly to create a continuous look. Due to required fabrication tolerances for flush joinery, engineered veneered wood composites are used. Member lengths are 8′ to maximize yield of veneered sheet goods.
The Flush Joint Linear provides a flush-joint closed reveal look and creates a continuous, “wood floor-on- the-ceiling” appearance. Access can be through strategically located access panels or from room perimeters. Members are clipped to T-Bar main runners progressively.
Flush Joint Linears must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.
The Flush Joint Linear is considered acoustically reflective.
Individual members and components can be coated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.
Flush Joint Linears may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.
The Flush Joint Linear permits MEP penetrations in the ceiling’s surface. Cut panels may require supplemental reinforcement. Fixtures and diffusers must be independently supported.
Clips are typically mechanically screwed to T-Bar for seismic compliance. Please consult local code or a licensed engineer for any additional requirements.
Species & Finishes
9Wood offers both domestic and imported species for the Flush Joint Linear. Clear, matte sheen finish is standard; custom stain matches are available. For additional information see our species article.
Flush Joint Linears are directly attached to 15/16″ heavy duty T-Bar main runners. Main runners are typically 2′ on center.
Flush Joint Linears typically weigh 3 pounds per square foot or less.