7100 Crown Molding Coffer
Dignified, substantial, traditional. This coffer ceiling speaks with authority. We offer various veneer patterns.
The 9Wood Crown Molding Coffer style wood ceiling offers a classic coffer profile typical of traditional woodworking. The coffer lays into 15/16″ standard T-Bar grid below the grid. Additional veneer pattern options are available for the coffer interior (see 7500 Coffer Patterns).
The Crown Molding Coffer is often used in spaces where a traditional decorative woodwork ceiling is desired. Picture frame assembly is used to fabricate and miter solid crown molding, which is attached to a veneered panel. A 3/16″ reveal is required between panels. Access is by lift, shift and removal. In seismic zones, a safety-wire tie-off may be required.
Crown Molding Coffers must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.
The Crown Molding Coffer is considered acoustically reflective.
Individual members and components can be treated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.
Crown Molding Coffers may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.
The Crown Molding Coffer permits MEP penetrations in the ceiling’s surface. Cut panels may require supplemental reinforcement. Fixtures and diffusers must be independently supported.
Wood Coffers may require a safety wire tie-off . Please consult local code or a licensed engineer for any additional requirements.
Species & Finishes
9Wood offers both domestic and imported species for the Crown Molding Coffer. Clear, matte sheen finish is standard; custom stain matches are available. For additional information see our species article.
Crown Molding Coffers lay onto 15/16″ heavy duty T-Bar main runners. Main runners are typically 2′ on center.
Crown Molding Coffers typically weigh 4 pounds per square foot.