9Wood

Home Your wood ceiling experts. Design to delivery.

6600 Monolithic Cube – Wood Grid

About andrewcox

6600 Monolithic Cube – Wood Grid

Ideal for clouds, this all-wood cube delivers the commanding look of angles and depth without a T-Bar.

Designed with thin blades in mind, the 9Wood Monolithic Cube – Wood Grid style wood ceiling offers a classic cell wood ceiling in a monolithic, continuous ceiling field. The 6600 Monolithic Cube – Wood Grid style is suspended from matching wood suspension members. When the cube infill panel is installed, all members are flush A.F.F., creating a monolithic appearance. Without the size limitation of commercial T-Bar grid, thin solid wood blades can be used.

The Monolithic Cube – Wood Grid is used in ceilings where a large percent opening is desired. The vertical member orientation creates a cut-off angle, which highlights the beauty of wood while hiding the plenum. Panels are installed using 9Wood Hook Clips™ and wood grid, which is suspended using eye screws. Access is achieved by lift, shift and removal. In seismic areas, safety tie-off wires may be required.

Download Documents

DATA SHEET

Download Now View Now

GUIDE SPEC

Download Now

CAD DETAILS

View All

ACOUSTIC TESTS

View All

SPECIFICATIONS
& PERFORMANCE

BELOW

SPECIES &
FINISHES

VIEW

REQUEST
SAMPLES

SUBMIT

FULL
LIBRARY

VISIT

Acclimatization

Monolithic Cubes must be cared for in a controlled interior environment (RH 25%-55% max; temp. 60°-80°) and installed only after reaching equilibrium moisture content. Should the building fall outside these limits, consult 9Wood for our Wood Ceiling Acclimatization for Professionals handbook.

Acoustics

The Monolithic Cube – Wood Grid can enhance acoustics via sound absorbing material placed over open reveals within the T-Bar grid. Insulation is typically provided locally.

Fire Rating

Individual members and components can be treated with Class I (A) Fire Retardant chemicals (solid wood use FR coatings, veneered particleboard use FR formulas). Particular species or styles have not been tested.

LEED

Monolithic Cubes may qualify toward MR-3, MR-4.1/4.2, MR-5.1/5.2, MR-6, MR-7, IEQ-4.2 or IEQ-4.4. As all products are custom-fabricated, LEED credit opportunities are project by project. Please contact 9Wood for specifics.

MEP

The Monolithic Cube – Wood Grid permits MEP penetrations in the ceiling’s surface. Cut panels may require supplemental reinforcement. Fixtures and diffusers must be independently supported.

Seismic

Monolithic Cubes typically require safety-wire tie-offs or a lock-down screw. Please consult local code or a licensed engineer for any additional requirements.

Species & Finishes

9Wood offers both domestic and imported species for the Monolithic Cube. Clear, matte sheen finish is standard; custom stain matches are available. For additional information see our species article.

Suspension

Monolithic Cube – Wood Grid ceilings are suspended using eye screws and standard wire suspension methods. Suspension wires are typically 2′ on center.

System Weight

Monolithic Cubes typically weigh 2-4 pounds per square foot, depending on members per linear foot and species.

Projects Featuring this System

James Madison University - Dining Hall

Harrisonburg, VA

James Madison University - Dining Hall

Harrisonburg, VA

Walton Arts Center

Fayetteville, AR

Walton Arts Center

Fayetteville, AR

Loma Linda University Social Action Corps Health Systems

San Bernardino, CA

Loma Linda University Social Action Corps Health Systems

San Bernardino, CA